hydrophobic 0.22 um ptfe syringe filter for solvents

Syringe filters with different pore size ratings are suitable for different applications. For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives.

Need a syringe for your syringe filter? Use these all-plastic disposable syringes with your Titan3, Target2, and Choice Basic syringe filters. Comprising a polypropylene barrel and polyethylene plunger, these syringes eliminate problems with rubber or synthetic plunger gaskets and requires no silicone or oil lubricant in the barrel.

0.22 GV 1 mL <10 µL Male stepped 100 SLGVR04NL 1000 SLGVR04NK 0.45 HV 1 mL <10 µL Male stepped 100 SLHVR04NL 1000 SLHVR04NK Fluoropore (Hydrophobic PTFE) Membrane 0.20 FG 1 mL <10 µL Male stepped 100 SLFGR04NL 0.45 FH 1 mL <10 µL Male stepped 100 SLFHR04NL 13 mm Diameter Millipore LCR (Hydrophilic PTFE) Membrane

Holding the filter device in one hand and the filled syringe in the other, secure (without excessive force) the filled syringe to the filter device with a twisting motion. Apply gentle pressure to begin filtration. (A gentle pressure helps assure maximum throughput.) CAUTION: As the filter removes particulate, filtration will become more

PTFE Syringe Filter (Non Sterile) Packed in Transparent Plastic Jar. HIigh quality and cost effective,these Polytetrafluoroethylene (PTFE) syring filters are HPLC Certified and available in hydrophotbic version , PTFE membrance are inherently hydrophobic,they are ideal for the filtration of nonpolar liquids and gases.

Hydrophobic PTFE syringe filters 25mm Diameter 0.22μm Pore Size For Industrial Filtration by KS-Tek Biotechnology (PACK OF 25)

Available in sizes and membrane types to meet any application need, Thermo Scientific™ Titan3™ PTFE Hydrophobic Syringe Filters provide cleaner sample extracts by removing interfering materials and fine particles. These filters are used for filtration of aggressive organic, highly basic or hot solutions and as transducer protectors.

0.22 μm 100 Pack PTFE Syringe Filters, Hydrophobic: Non-Sterile 25 mm 0.45 μm ... Very resistant to solvents as well as acids or bases.

biological fluids and gases is usually done with 0.2 or 0.22 µm pore filter membranes. Clarification and prefiltration of solutions and solvents is best accomplished with 0.45 µm or larger filter membranes. Prefiltration to improve filter performance can also be accomplished by the use of glass fiber prefilters that can be purchased separately.

Red PTFE (Hydrophilic) Syringe Filters, 0.22 µm, 13 mm (100/pack) Versatile filters for use with aqueous and aggressive organic solvent-based solutions and are suitable for HPLC sample preparation.

Filtration is eminent in nearly all environmental, chemistry and bioscientific lab & analytical applications. We offer a range of Syringe Filters, Micro-Funnels, Blotting Membranes and Membrane Disc Filters, which are widely used for Chromatography, Removal of Precipitates and Coagulates and Microbiology & Sterility Testing

The sterile hydrophobic PTFE syringe filter provided by Hawach is autoclaved at 121°C and 1 bar for 20 minutes/EO/Gamma. It has a wide range of chemical compatibility, good retention rate, simple and easy operation, and can be widely used in organic solvent filtration and gas filtration. See full list on hawachfilters.com

Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common

Syringe Filter PTFE 13MM 0.2um NS Axiva / PK 100. PTFE syringe filter is hydrophobic and so is not recommended for the filtration of aqueous solution. For filtering aqueous solution PTFE requires pre-wetting with alcohol to establish flow with reasonable pressure differentials.

CELLTREAT Scientific Products 0.22µm PTFE Syringe Filter. Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives. Female luer-lock inlet and make luer slip outlet. Color coded by membrane type for easy identification. PTFE (Polytetrafluoroethylene). Hydrophobic membrane has great temperature