hydrophobic 0.2 um syringe filter distributor

Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.

LINKTOR Syringe Filter PES (Polyethersulfone) Hydrophilic Filtration, General Luer Taper 25mm Diameter 0.22 um Pore Size Non Sterile, Pack of 20 (Pack of 20, 0.22μm PES) 4.4 out of 5 stars 101 $14.99

Finneran 13mm Mini-Tip Syringe Filters provide extremely low dead volume of less than 10ul, and are available in 0.2um and 0.45um pore sizes. Autoclavable. Autoclavable. Related Products: Syringe Filter 0.2

PharmAssure Syringe Filters with Supor Membrane. Single use Supor polyethersulfone membrane; Maximum operating pressure: 75 psi (5.2 bar) Non-pyrogenic; Sterile Minimal retention volumes: 50 µL for the 25 mm and < 100 µL for the 32 mm filter; PharmAssure 25 mm Vent Filters. 0.2 µm hydrophobic vent membrane; Maximum operating pressure: 15 psi

Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Diameter: 4 mm: Diameter (Metric) Membrane: 4 mm: Item Description: 0.2 um, 4 mm, 100 Pk. Pressure Rating: 75psi: Type: Syringe Filter

Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10. - Find MSDS or SDS, a COA, data sheets and more information.

Laboratory Filters - 50JP020AN - Advantec Syringe Filters, 0.2 um Hydrophobic PTFE, 50 mm; 10/Pk -- GO-81054-68 Supplier: Cole-Parmer Description: membrane pore size • Housings have standard luer connectors; 50-mm filters feature 7 to 13.5 mm hose barb connectors PTFE Hydrophobic Filters with a laminated polypropylene support can be used to

The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are

A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized. Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.

Whatman 6869-2502 GD/X 25 mm Syringe Filter, nylon high charge (positive), nylon filtration medium, 0.2 um (150 pcs) Regular Price: $505.85 Price $439.87

Millex filter units with hydrophobic Fluoropore membrane are ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic solutions. Specialized filter units protect hemodialysis transducers from blood and moisture. 50 mm Millex filter units are also used for vacuum line protection. All units are bi-directional.

the device against overfilling, the labForce™ Pipette Controller is equipped with a 0.2 um PTFE filter. The filter, the pipette holder and the nosepiece are autoclavable. . Includes a universal battery charger, an additional hydrophobic 0.2 µm filter and a two-position charging st

0.2 um filter (0.2 micron) pore size Hydrophobic PVDF Transfer Membrane for western blotting using Chemiluminescence, Chromogenic or Radioactive detection methods. Comes in an 8.5 cm x 10 m roll.

Sterlitech Corporation is the world's largest producer of inorganic membranes & filtration products.

PTFE syringe filters are hydrophobic and chemically resistant to all solvents, acids, and bases. PTFE does not impart any extractables to the filtrate. It's an ideal material for transducer protectors because it blocks water vapor. PTFE is ideal for filtering and de-gassing chromatography solvents.