hydrophilic 0.2um ptfe filter for sterilization

10″ Hydrophilic PTFE Filter Cartridge Flow Rate Construction Material Filter Media Hydrophilic PTFE membrane Support Layers Polypropylene Micron Rating 0.1, 0.2, 0.45, 0.65, 1.0, 3.0μm Inner Core Reinforced Polypropylene Outer Cage & End Caps O-ring

0.2 µm sterilizing filter will retain 10 organisms per cm² of Pseudomonus diminuta at 30 psig and ambient temperature Fun fact: Due to viscosity differences, a 0.2 micron pore size rated membrane in liquid can retain up to 0.02 micron particles in air

Millex-LG, 0.20 µm A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Comes in a pack of 50. - Find MSDS or SDS, a COA, data sheets and more information. Sterile Millex ® Syringe Filters for Liquid and Air Sterilization

Key Features Highly safe sterilization, ensuring 100% filter efficiency in humid environment during gas filter, 0.2um filter rating in liquid, for gas filter, single layer: < Φ0.01μm; double layer: < 0.003μmΦ; Strong hydrophobicity, passing water intrusion test

Product Details. 100% filter cartridges were integrity tested assure the safe of filtration. PVDF membrane Microporous Folding water Filter is made of the pleated support layer consisting of imported polyvinylenedifluoride. Hydrophilic PVDF Membrane filter for liquids sterile filtration, absolute rating

Filter Media Length Pore Size Adaptor Sealing Core CRPTFEG: Hydrophobic Polytetrafluoroethylene 005 = 5 inch 010 = 10 inch 020 = 20 inch 030 = 30 inch 040 = 40 inch 005 = 0.05μm 010 = 0.1μm 020 = 0.22μm 040 = 0.45μm 100 = 1.0μm 0 = DOE 2 = 222

Minisart® SRP15 Syringe Filter 17558----------K, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17558 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration and has a male spike outlet.

0.45 μm ≥ 600 mbar Sterilization By autoclave at 123 or EO Functions Hydrophilic PTFE membrane is wettable. It can offer superior chemical compatibility, resistant to almost all kinds of solvents. It’s applicable for organic solvents filtration, acids or bases etc.

Omnipore Membrane Filter 0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter; find Millipore-JGWP04700 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich Our Fluoropore ® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of

「疎水性PTFEフィルター(0.2μm) (5個入)」。富士フイルム和光純薬株式会社は、試験研究用試薬・抗体の製造販売および各種受託サービスを行っています。先端技術の研究から、ライフサイエンス関連、有機合成用や環境測定用試薬まで、幅広い分野で多種多様なニーズに応えています。

PTFE Syringe Filters, 0.45 µm (250/pkg 750/cs)PTFE Syringe FiltersNon-Sterile Syringe Filters Pall Corporation is a filtration, separation and purification leader providing solutions to meet the critical fluid management needs of customers across the broad spectrum

Durapore® Membrane Filter, 0.22 µm 0.22 µm pore size, hydrophilic PVDF, 142 mm membrane; find Millipore-GVWP14250 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich Durapore ® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility.

Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. All materials of this filter element meet the

Made of high-quality PTFE Polypropylene housing Various filtering cut-off particle sizes in the range : 0.2 and 0.45 µm Diameter:13mm, 25mm and 28mm Units can be purchased pre-sterilized and individually packaged or non-sterile in bulk pack All polypropylene

Solutions containing a known concentration of either 0.24 μm or 0.5 μm particles were filtered using 0.45 μm hydrophilic PTFE syringe filters and particle concentration in the final filtrate was measured to determine the average particle retention for each filter