hydrophilic 0.2um ptfe filter for chemicals

MilliporeSigma. This 13 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in clarification of aqueous & mild organic solutions for ion chromatography. Disposable syringe-operated filter units certified for ion chromatography sample.

Sterilizing Grade 0.2 Micron PTFE Membrane Filter Cartridge. SERENE Hydrophobic PTFE Sterilizing Grade 0.2um filter cartridges are highly retentive hydrophobic membrane designed for critical liquid and gas sterilization. Hydrophobic PTFE filter medium provides exceptionally high air flow rates at low differential pressures Naturally Hydrophobic Membrane also provides high assurance of filter integrity andlong life, during high temperature venting application and during repeated steaming.

The naturally hydrophilic Nylon 6,6 membrane provides low extractable, long filter life and enhanced contaminant reduction. LifeASSURE™ IMC filter cartridges are ideally suited for DI water, critical parts cleaning, and other chemical applications where high efficiency contaminant reductions at 0.1, 0.2, 0.45, 0.65, and 0.80 µm is required.

0 = Hydrophilic (-HP) Model SV = Savana PTFE cartridge filter Code 0 = Code 0 Length 1P = 10” large size O-ring 0 =FKM -E or (f large size) E = EPDM V = FKM Quantity 1 = 1/pack Savana PTFE 226 THF/THP Liquid Filter (Ø83 mm Code 6) PERFORMANCE DATA — 0.1 µm Savana PTFE 226 THF Cartridge Filters GPM 0.2 µm 0.5 µm 1 µm 3 µm/10 µm 0.1

A versatile PVDF membrane filter designed for critical filtration of aqueous and organic solvent-based solutions. The hydrophilic SteriLUX ® polyvinylidene fluoride (PVDF) membrane filter is available in discs, capsules, high capacity UltraCap ® and UltraCap ® H.D. capsules, and cartridges with 0.1 µm, 0.2 µm, 0.4 µm and 0.6 µm absolute ratings.

Features a hydrophilic PTFE membrane. MilliporeSigma™ Millex™-LG Syringe Filter, 0.20μm, Hydrophilic PTFE is used in non-sterile filtration to remove low protein binding fine particles from aqueous and organic solutions. These filters are recommended for filtration prior to instrumentation analysis.

Advantec HYDROPHILIC PTFE Syringe Filter 13HP020AN, Pore Size 0.2um, Diameter 13mm, Unit Quantity 100 (+$151.40) 13HP045AN, Pore Size 0.45um, Diameter 13mm, Unit Quantity 100 (+$151.40)

Foxx Life Sciences EZFlow Syringe Filters, Hydrophobic and Hydrophilic, PTFE EZFlow ® 13, 25 and 33 mm sample prep syringe filters are designed for aqueous and organic solution samples. The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC.

Broad chemical compatibility, highly resistant to strong acids and bases. Hydrophobic Very low protein binding. Hydrophilic pH range 1 to 14 4 to 8 Gamma globulin adsorption (protein binding) <10 µg/cm2 Glass Microfiber/Nylon Glass Microfiber/PTFE 25 mm 15 mm 25 mm Pore size 0.2 µm (nylon) 0.45 0.2 0.45 0.2 0.45 Filter area (cm2) 4.8 4.8 1

0.1um, 0.2um (0.01um in a gas), 0.45um,0.65um,1.0um, 3.0um,5um and 0.01um: Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.

Syringe Filter Hydrophilic PTFE 25mm, 0.2um,Qty 100 $90.00 $55.00 Syringe Filter Hydrophilic PTFE 4mm, 0.2um,Qty 200 $100.00 $50.00 Syringe Filter Nylon 13mm, 0.2um