high performance 0.2um syringe filter for venting

Minisart® RC15 Syringe Filter 17761----------R, 0.2 µm Regenerated Cellulose. Minisart ® RC with hydrophilic regenerated cellulose (RC) is optimized for aqueous liquids and solvents with a pH of 3 - 14 and is stable against DMSO. Type 17761 with a pore size of 0.2 µm can be used for sample preparation and has a male luer slip outlet.

Millex-GV Filter, 0.22 µm. Background Information. Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex® filters because of their unsurpassed quality and consistency.

Hydrophobic PVDF Membrane Syringe Filter 0.2um for Sterile Filter Adopts Original Imported Products, Especially For Gas With Analysis Of The Pretreatment System Development, To Protect The Analyzer. Scientific And Reasonable Gas Circuit, With A

Sartorius Minisart ® Syringe Filters with Acrylic-based Housing: Ideal for Liquid Cleanup & Sterilization Sterilization by filtration is the fastest solution for bacterial cell removal from liquids with minimal effect on the ingredients. For optimal results Minisart ® filters made of acrylic-based MBS housing provide a choice of membranes with pore sizes ranging from 0.1 µm to 5 µm for

Pall’s sterile syringe filters are available with a variety of high-performance membranes to suit application requirements: Fluorodyne® II Membrane - For high flow rates and low protein binding. Not recommended for use with some ethers. Nylon Membrane - Used in our DMSO-Safe Acrodisc syringe filter.

Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters. Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives.

MS® CA Syringe filters are suitable for the filtration of aqueous solutions. Cellulose Acetate combine high flow rates and thermal stability with very low absorption characteristics. Especially 0.22μm pore size CA Membrane excellently suited for sterilization aqueous solutions, buffers, sera and

The hydrophilic PTFE syringe filter can instead of PES, N6, PVDF syringe filter, is used for high temperature liquid filtration with excellent biological safety, chemical inertness, low adsorption and high temperature resistance. The pore diameter is 0.22μm/0.45μm, the flux is large, the strength is high, and the high temperature does not

Never re-use a syringe filter, even if it looks perfectly clean. Whatman products filter out extremely fine 09302101 Nylon high charge (positive) 0.2 150 09302102 Nylon high charge (positive) 0.45 150 0992726C Nylon 0.2 150 Continued on page 7 25 mm GD ...

PTFE Vent Filter, Sterile, 0.2 Micron, 50mm, 6 to 12mm hose BARB, 10/Pk. Easy-to-use, sterile ,and disposable, these In-Line Filters contain a hydrophobic PTFE membrane ideal for confining and isolating infectious and hazardous material in vacuum systems and venting applications.

Sterile Syringe Filters. Pall Laboratory offers superior performance sterile syringe filters for a variety of sterile laboratory filtration applications. Choose from a variety of membrane types, pore sizes, and effective filtration areas to meet your specific application requirements. Our filter sizes accommodate sample volumes from < 2 to 200 mL.

High performance sterile and nonsterile syringe filters offered in a variety of membrane materials and pore sizes, tailored for sample preparation for HPLC, UHPLC, ion

The hydrophobic Steridyne ® polyvinylidene fluoride (PVDF) membrane filter is 0.2 µm absolute-rated for the sterile filtration of air and gases. Offering broad chemical compatibility, the Steridyne ® filter is ideal for the filtration of pharmaceutical, biological and aggressive process gases, including sterile tank venting, fermentation air, and compressed air and gases.

Introduction. MS ® PTFE syringe filters are purpose-built with features designed to bring the highest levels of performance and purity to your research. We incorporate a variety of membranes to offer separation and purification solutions for the majority of your laboratory needs. PTFE Syringe Filter.

Millex-GV Filter, 0.22 µm A 25 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Comes in a pack of 50.; find Millipore-SLGVV255F MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma