High-Performance Liquid Chromatography system (HPLC) to detect and separate 5 Restek* standard, with run-times for both ... • Filtered through a 0.2 um Filter.
A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Comes in a pack of 50. Simply better membrane technology, simply better Stericup® filters. Millex Sterile syringe filter units are available in a larger 33mm housing with either MCE, PVDF or PES membranes.
Nest syringe filters have pore size either 0.22µm or 0.45µm, and diameter 13mm or 25mm, with membrane materials either with PES or PVDF membranes. For sample volumes of 2mL to 100mL. Retention volume <115µL. Maximum operating temperature: 100°C autoclave at 125°C for 15 min. Maximum operating pressure approximately 100 ps.
VWR High Performance Single Channel (VWR International) FastPette Membrane Filters, PTFE, Autoclavable, 0.2um, 5pk (Labnet) Item: LN P2023 $ 22.95.
Description: Filter cartridge, Sterile filter 0,2 µm. High Performance. Supplier: ... PTFE or nylon membrane. Membranes are available in either 0,2 or 0,45 µm ...
At the heart of every Kleenpak Emflon PFR Capsule filter is a high-performance pleated cartridge, containing proprietary PTFE membrane. The high-strength PTFE membrane is inherently hydrophobic, chemically inert, and designed specifically for removal of contaminating bacteria and viruses. Emflon PFR filters have a microbial removal rating of 0.2 µm in liquids and a particulate removal rating of 0.003 µm in gases.
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high Related Products: Air Vent Filter
Sartofluor® cartridges are available in the optimum range of pore sizes – 0.45 µm, 0.2 µm and 0.1 µm. Dependable performance at every scale. Our scale-up philosophy does not stop at liquid filtration. Especially in air filtration, with its variety of applications and demands, different filter sizes are essential.
Pressure Zero Offset –0.2 psi Pressure Control Accuracy <10% or 100 psi whichever is larger Dimensions 5.5” high x 10.375” wide x 17.5” deep Weight 30 lb Power 100–240 VAC, 50–60 Hz, 45W (main voltage supply not to exceed ±10%) Environmental Indoor use only Altitude Maximum 2000 M Temperature 10–30° C Relative Humidity 20–90%
6. MilliporeSigma™ Supelco™ PTFE Frit, Porosity: 20 μm. Frits are crucial components of the high performance liquid chromatography system design. They act as a depth filter for the concurrent physical removal of small molecules. Medium, 20 μm porosity frits are used for crystalline precipitates and extraction applications. Pricing
Whatman 10462300, Puradisc FP 30 mm Polytetrafluoroethylene Syringe Filter, 0.2 um, sterile (50 pcs) Regular Price: $185.69 Price $161.47
Interlocked Vial/Insert 300 µL Clear, 11 mm Crimp or Snap Ring Restek 22433 Polypropylene plastic snap-top vial, 300 µL, with cap and bonded PTFE/silicone septa Waters 186002642 Other materials used: • Samplicity® filtration system (Cat. Nos. SAMPSYSGR or SAMPSYSBL) with Millex Samplicity® Filters (0.2 µm pore size, Cat. No. SAMPLG001)
Max Fill Vol. 450µl; Dead Vol. 120µl; Eliminate Syringe Filter, Syringe, HPLC Vial, HPLC Cap; ECO Friendly; Simple to Use; Easy to Press Down; Prevents Costly Repairs & Service
High Performance Liquid Chromatography ; added to 0.2 µM PTFE filter vials for HPLC injection. ... 1.0 2.0 3.0 4.0 5.0 0 100 200 300 400 500 600 700 800 mAU