high flow rate ptfe 0.2 micron filter Advantec

Millipore Express® PLUS hydrophilic polyethersulfone (PES) membranes are commonly used as an alternative to cellulose membranes and offer fast flow, high filter capacity, and low protein binding while remaining bacterially retentive. Polypropylene membrane and net filters feature both solvent-compatibility and thermal stability. These filters are ideally suited for general solution clarification and prefiltration applications, including bioburden reduction.

0.6 - 10 micron • High capacity • Maximum throughput Glass Fibre Liquid filtration TETPOR AIR 0.2 micron • Validated by aerosol challenge PTFE HIGH FLOW TETPOR II • Unrivalled flow rates • Validated by aerosol challenge PTFE HIGH FLOW TETPOR HT • Continuous use at high temperatures • Validated by aerosol challenge PTFE Sterile gas

HIGH FLOW TETPOR II is validated as a 0.2 micron sterilizing grade filter in liquids through ASTM F838-05 and in gas through full retention to an aerosol challenge of MS2 phage. This ensures the filter will guarantee the sterility of your process in the worst-case scenario where the filter may be subjected to bulk liquid due to a process problem.

0.02 micron PTFE membrane air filter element for removing bacterial. Country/Region: China. Main Products: Air Filter,Water Filter,Oil Filter,Oil Water Separator,air purifier. Total Revenue: US$2.5 Million - US$5 Million. Top 3 Markets: Domestic Market 50% , Southeast Asia 16% , South America 10%.

PTFE Unlaminated Membrane Filters, Hydrophilic, 0.2 Micron, 25mm, 100/Pk (H020A025A) Durable, efficient, and broadly compatible, these pure, hydrophilic PTFE membranes are ideal for use with HPLC seperations, aqueous/organic solvents, and many of your other filtration needs. Pack of 100.

Whatman 6726-5002A Aqueous IFD Nylon In-line Filter, 42 psi Maximum Pressure, 0.2 Micron, 2.5mL/min Flow Rate, 50mm Diameter (Pack of 5) $143.67. #10. Whatman 6723-5000 Hepa-Vent Venting Filter Disc with Inlet 1/4" to 3/8" SB and Outlet 1/4". 3.9 out of 5 stars.

Mini Kleenpak™ Air and Gas Filters with Emflon® PFA membrane are self-contained, compact units designed for venting of small containers, and for use in low-pressure gas lines. The capsule contains a 0.2 μm-rated PTFE membrane, offering high removal efficiency for airborne bacteria and particulates. The membrane is moulded into a

Capsules and in-line filters are designed for filtering certain gases or liquids. Choose from disposable or reusable filters for general or specialty uses. When selecting a filter consider the filter media, chemical compatibility, airflow rates, water flow rates, if you need sterile filters, filtration area, filter dimensions, and pore size

Donaldson PT N filters utilize membrane media for use in harsh filtration applications such as highly acidic or alkali solutions. • Absolute particulate retention rates at 0.2 µm • Highly porous, hydrophobic, PTFE membrane media for high flow rates and high retention of particles • Polypropylene end caps and support cores

Advantec PF10047MM PTFE Depth Filter, 10 µm 5 gpm Flow Rate, 0.2 Micron. ... resistance excellent air permeability with minimal pressure drop high loading ...

Non-Sterile Mixed Cellulose Esters (MCE) Membrane Filters - White, 5.0µm. Advantec MFS. Esters (MCE) membrane is a general purpose filter used in many applications for the microbiological examination of water, wastewater, pharmaceuticals, food, and beverages, and air monitoring. MCE membranes offer high recovery rates and superior flow rates.

VWR® Glass Fiber Filters. Supplier: VWR International. Description: Binder-free VWR® glass fiber filters feature fast flow rates, high-loading capacity, wide thermal tolerance, and excellent precipitate retention. Certificates. ,28333-135PK,28297-976PK,28297-510PK,28297-504PK,28333-129PK,28333-133PK,28333-137PK.

Filter Paper Grade 2. Circles: 42.5 mm to 500 mm (available prepleated) Sheets: 460 x 570 mm to 580 x 680 mm. Particle retention 1: 8µm. Nominal thickness: 190 µm. Nominal basis weight: 97 g/m 2. Nominal ash content 2: 0.06%. Grade 2 is slightly more retentive than Grade 1, with an equivalent increase in filtration time.

Advantec's grade GB140 Glass Fiber Filter is a thick, fine-porosity (0.4 micron particle retention) filter with a medium/slow flow rate, low absorbtion, and high wet-strength for analytical, gravimetric, and industrial waste analysis.

Hydrophobic PTFE Membrane Filters / Type 11807. The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Added to Shopping Cart.