high flow rate 0.22 um syringe filter for laboratory vacuum filter system

The filters have a very low level of protein adsorption, they are biocompatible, non-cytotoxic and have very small dead volumes and high flow rates. Their properties make Filtropur S, Filtropur S plus and Filtropur L filters with a pore size of 0.2 µm particularly suitable for the sterilisation of aqueous solutions.

Durapore™ PVDF Membranes: 0.22μ Pore Size provide high flow rates and throughput, low extractables, broad chemical compatibility and low protein binding. Available in diameters ranging from 13mm to 142mm. Composed of polyvinylidene fluoride (PVDF) that binds far less protein than than nylon, nitrocellulose or PTFE membranes

Introduction Microlab PTFE membrane media for filtration is made of PTFE (polytetrafluoroethylene), and were drawn 2-demension.It is micro-pore film. Applied to extensive industries, including pharmacy, biochemistry, microelectronic, and lab material and etc. Directly and indirectly related to pharmacy, brewing, manufacture of pure water and special need water, beverage and dairy, chemical

Corning ® bottle-top vacuum filters cellulose acetate membrane, sterile, pore size 0.22 μm, membrane diam. 70 mm, funnel capacity 500 mL, case of 12 Synonym: bottle top filters, laboratory filters, vacuum system filters NACRES NB.24

Captiva syringe filters offer the industry’s highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime. Choose from a variety of membrane types and pore sizes to suit your needs.

EZFlow 13mm, 25mm, and 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with

Devices feature the fastest flow rate and lowest clogging of comparable alternatives; 0.1um PES available for mycoplasma protection; 0.2um PES devices are stem cell and mouse embryonic assay (MEA) tested ; Non-pyrogenic and endotoxin free - Rapid-Flow filter units meet the most rigorous testing standards for any vacuum filtration unit.

Filter Design. Pall Life Sciences' broad range of device sizes assures complete sample filtration with minimal sample loss. In addition, many Acrodisc Syringe Filters offer the option of a minispike outlet, rather than the traditional male luer outlet.

0.22 Filter found in: 0.22mm Filter 20 F/Super Q, 0.22 Micron Filter, Purple Nylon Syringe Filters, 0.22 µm, Yellow Nylon Syringe Filters, 0.22 µm, Micro..

Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications. Features & Benefits: •Tailored to a variety of applications based on membrane type, housing and validation rating •Medical Device-rated devices in some countries including vented devices for direct patient care •Specialized filter units to protect hemod See full list on sigmaaldrich.com A 25 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Comes in a pack of 50. Direct patient care: Yes, location dependent See full list on sigmaaldrich.com Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany Luer-Lok is a registered trademark of Becton-Dickinson & Co. Millex is a registered trademark of Merck KGaA, Darmstadt, Germany See full list on sigmaaldrich.com

Vacuum Driven Sterile Filters The Stericup® and Steritop™ comprise MilliporeSigma’s legendary high performance vacuum filtration systems. Stericup® filter units are available with a receiver flask for processing and storing volumes from 150 mL up to 1,000 mL.

Pore Size Filter Size Filter Type Filter Area (cm²) Holdup Volume (µL) Housing Material Housing OD (mm) Connections Maximum Pressure (bar) Recommended Sample Volume (mL)

Filtration is an integral piece of nearly every workflow of every lab. Whether its cell culture, protein research, water testing, bioprocess design, or QA/QC testing of beverages – filtration will play a role in your lab’s daily routine and Thermo Fisher Scientific has the tools you need.

Filter systems can filter and clarify samples. Glass fiber filters allow resistance to the flow of liquids and encompass a high capacity for particle loading. Inline filters and filter capsules confine and isolate infectious and hazardous material in vacuum systems, venting, and exhausting applications.

Distributor / Channel Partner of Laboratory Filtration Products - Sterile Syringe Filter, Non-Sterile Syringe Filters, Millex Syringe Filters Non Sterile and Syringe Filter, PVDF, Non-Sterile offered by Maxcell Systems Pvt. Ltd., Bengaluru, Karnataka.