Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments that would otherwise
Shop a large selection of Thermo Scientific Titan3 PTFE (Hydrophobic) Syringe Filters products and learn more about Thermo Scientific Titan3 PTFE (Hydrophobic) Limited warranty period: Subject to all warranty requirements and exclusions set out in our Terms and Conditions of Sale, this product is warranted from the date we ship the product and for ninety (90) days thereafter.
Whatman ® Puradisc Syringe Filters Puradisc syringe filters combine premium quality and economy. They are ideal for the quick, efficient filtration of samples up to 100 mL volume. Puradisc filters are produced from pigment-free polypropylene or polycarbonate with standard inlet (female luer lock) and outlet (male luer) connections (unless otherwise stated).
Sterlitech Silver Membrane, 0.2 Micron, 25mm, 50/Pk. Pure metallic silver (99.97% pure silver); inorganic, hydrophilic membrane filter; pore rating of 0.2 microns and a diameter of 25 mm.
4472 Acrodisc CR PTFE, 0.45 µm, 4 mm 250/750 4552 Acrodisc CR PTFE Minispike, 0.2 µm, 13 mm 100/300 purge” minimizes fluid retention within the filter device. Fill the syringe with the solution to be filtered. CAUTION: Use of syringes smaller than 10 ...
Cytiva Whatman™ Uniflo™ 25 Syringe Filters. Ideal for filtration of organic-based samples. Whatman™ Uniflo Syringe Filter, PTFE Membrane is a disposable, hydrophobic filter unit that will not allow water to pass without high pressures. The polytetrafluoroethylene membrane will also stop aqueous aerosols in
Shop a large selection of Thermo Scientific Titan3 PTFE (Hydrophilic) Syringe Filters products and learn more about Thermo Scientific Titan3 PTFE (Hydrophilic) Limited warranty period: Subject to all warranty requirements and exclusions set out in our
Polypropylene syringe filters are the optimal choice for analytical sample preparation. Pall’s polypropylene non-sterile syringe filter housing is chemically resistant to harsh solvents, is low in extractables and low in API and biomolecular compound adsorption. Chemical compatibility is a critical consideration when selecting a syringe filter.
17/2/2020 · The most commonly used syringe filter pore sizes are 0.2/0.22 um and 0.45 um syringe filters, for research and medical applications. The pore size to be used is usually determined by the particle size to be eliminated.
Membrane Material PTFE Housing Material Polypropylene Pore Size (µm) 0.2 Filter Diameter (mm) 50 Effective Filter Area (cm²) 15.9 Connections 1/4" to 3/8" stepped barb Max Pressure (PSI) 60 Description 50mm in-line disc filter, PTFE, 0.2um, 10/pk
Designed for fast and reliable filtration of small to medium volumes. Sartorius Minisart™ High Flow (HF) Syringe Filters are complete, ready-to-connect units with a high-flow PES membrane. These 28mm filters are available in sterile and non-sterile options, with a 0.2 or 0.45μm pore size. Pricing and Availability.
It is a common misconception that sterile air/gas filtration requires the use of a filter containing small pores. A 0.2 µm filter is required for sterile liquid filtration; however, this pore size is not necessary when sterilizing air or gas since the filtration mechanisms in air differ significantly from those in liquid.
Syringe filter Millex-FG 25mm PTFE 0.2um Non-sterile / PK 50 Login to view pricing 25 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane Syringe Filter Millex-GP 33mm PES .22um Non Sterile / PK 1000
Do not use internally or externally in humans or animals. The Whatman 25 mm GD/X Syringe Filters are designed to enable the filtration of viscous, hard-to-filter samples greater than 10 mL. They are available in a wide variety of filter choices with a polypropylene
28/9/2016 · The most common ones used in physical chemistry laboratories are 0.2 um and 0.45um. Generally, 0.45um is sufficient for the majority of procedures. However, where smaller particles may be present in the sample 0.2 um or 0.1 um might be more appropriate.
