Pioneers in the industry, we offer Pall Membrane Filter, Nitrile Examination Gloves Powder Free Nitrile Rubber Gloves, Merck TLC Plate Silica Gel 60 F254 1.05554.0007, Merck TLC Plate 1.05554.0007, Millipore Membrane Filter 0.22 Micron 47mm Diameter and GN-6 Metricel MCE Membrane Disc Filters from India.
Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Pricing and Availability.
GVWP04700. Trade Name. Durapore ®. Description. Durapore® Membrane Filter, 0.22 µm. Background Information. Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
• If the filter application is bacteria removal, then the filter and system should be tested using sterile water and air (filtered to 0.22 microns or smaller) after the filter has been disinfected or sterilized and before use. • If the cartridge appears to fail the test, retest. If necessary, check the cartridge seal in the housing.
Life Science Research. Reagents, Chemicals and Labware. Small Molecule Pharmaceuticals. Water Purification. All Analytics and Sample Preparation Biopharmaceutical Manufacturing Industrial Microbiology IVD/OEM Kits, Materials and Reagents Life Science Research Reagents, Chemicals and Labware Small Molecule Pharmaceuticals Water Purification. 1. 2.
Syringe filters are available in a range of sizes with different effective filtration areas (EFA). EFA is the filter area that is available for filtration. For a given membrane, the larger the filter area, the higher the flow rate and greater the throughput. Throughput is the amount of fluid able to pass through a filter prior to plugging.
0.22 Micron Filter Barnstead (25cm) double open-ended cartridges have 2 Buna-N gaskets for positive seal Pleated membrane has 4.75 sq. ft. (0.46m 2 ) surface area Recommended flowrate: 2 gal./min. (7.5L/min.) Autoclavable at 118°C (245°F) For Use with: Economy Filter Holders 09-034-155, 09-034-156
The syringe filters are available in many different pore sizes and with several hydrophilic or hydrophobic membrane materials.ISO9000 certified manufacturing is carried out to the highest standards, in certified clean room conditions, using the latest manufacturing technology to ensure a high quality, consistent product.
4mm Millex filters, perfect for small sample sizes. 13mm Millex filters, for processing <10mL. 25mm Millex filters come in several membrane types suitable for filtration and venting purposes - Find MSDS or SDS, a COA, data sheets and more information.
SLGL0250S. A 25 mm diameter sterile syringe filter with a 0.22 µm pore size Mixed Cellulose Esters membrane. Comes in a pack of 50. Pricing. Match Criteria: Product Name. Millex Syringe Filter, Hydrophilic PTFE, Non-sterile. Millex Syringe Filter, Hydrophilic PTFE, Non-sterile. Product Number.
Durapore 0.22 µm hydrophobic polyvinylidene fluoride (PVDF) membrane reliably eliminates contaminants and microorganisms in sterilizing applications, even at high pH. Opticap XL capsule filters eliminate the time and expense associated with assembling, cleaning, and validating stainless steel housings.
0.22 Micron Syringe Filters Tisch Scientific offers an extensive selection of proven, yet affordable syringe filters that are in stock and ready to ship today. Selected for their durability, material quality and performance characteristics, our syringe filters deliver accurate, measurable results at a fraction of the cost.
Merck Millipore millex syringe filters and ominpore or isopore merane filters by Merck Millipore. Material, Syringe Filter, Millex GV, PVDF, 13 mm, 0,22 µm, 21 mm, nicht steril, 100/Pak €271.00 Certified µm nylon merane filter for hplc millex
Nest syringe filters have pore size either 0.22µm or 0.45µm, and diameter 13mm or 25mm, with membrane materials either with PES or PVDF membranes. For sample volumes of 2mL to 100mL. Retention volume <115µL. Maximum operating temperature: 100°C autoclave at 125°C for 15 min. Maximum operating pressure approximately 100 ps.
