16596 HYK 26 mm 5.3 cm2 Minisart HY, sterile pack of 50, 0.2um PTFE membrane, MBS housing Minisart Syringe Filters Minisart syringe filters are ready-to-use filter units, offering high flow rates at low inlet pressures, to make rapid filtration of possible.
Captiva syringe filters are typically used to prepare small-volume samples for HPLC and ion chromatography. They allow for high flowrates and loading volumes, and also extend column lifetimes considerably. Find out more here.
8/1/2017 · PTFE membranes are chemically resistant to nearly all solvents, acids and bases. The membrane has low extractable and good thermal stability. PTFE is hydrophobic and requires pre-wetting prior to use with aqueous solvents. Sterilization: Syringe filters
0.2um Syringe Filter, Mce Syringe Filter, PTFE Syringe Filter manufacturer / supplier in China, offering 0.45um 0.22um 13mm 25mm Pes Syringe Filter Supply Independent Sterilization Packing, Hydrophilic Nylon (N6/N66) Membrane for Hydrophilic Filter Membrane
Available pore sizes are 0.22um and 0.45um. Available diameters are 17mm and 30mm. Compatible with nearly all solvents. Lower backpressure with aqueous solvents. The most universal filter. Similar to Acrodisc GHP membrane syringe filters. Additional glass fiber layer. Certified
Aervent CTGR Cartridge Filter 10 in. 0.2 µm Code 7 - Find MSDS or SDS, a COA, data sheets and more information. Product Information Device Configuration Cartridge Maximum Differential Pressure, bar (psid) Forward: 5.5 bar (80 psid) @ 25 C; 1.8 bar (25
PTFE membrane filters are strong and resistant to acids, bases, and solvents, and stable at high temperatures. With their low background and low tare mass they are ideal for gravimetric or aerosol/gas/vapour sampling. They are also available in preloaded, leak
Syringe filter Sartorius Minisart HY 26 with polytetrafluoroethylene (PTFE) membrane, 0.22um pore size, 26mm diameter, not sterile, pack of 500 Sartorius Minisart HY 26 Filtration Consumables - Syringe Filter
20 EA/Case 3M Particulate Filter 5N11, N95 3M Particulate Filter 2091/07000(AAD), P100 Post-it® Super Sticky Notes, 3 in. x 3 in., Miami Collection, 12 Pads/Pack, 90 Sheets/Pad Post-it® Super Sticky Notes, 4 in. x 4 in., Miami Collection Next
50MM PTFE INLET SYRINGE FILTER: 50mm 0.22um or 0.45um PTFE Inlet Syringe Filters, Hydrophobic PTFE membrane is laminated with polypropylene. 50MM PTFE MAIN APPLICATION: Naturally hydrophobic PTFE membrane provides the best chemical resistance, and can be used forventing applications or filtering gases , individually wrapped filters.
Minisart® SRP15 Syringe Filter 17573-----K, 0.2 µm hydrophobic PTFE Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample
Water and acetonitrile were passed through polypropylene or PTFE syringe filters (as indicated in legend), then used 1:1 (v/v) to prepare the mobile phase for UHPLC. The system was run at 0.25 mL/min for 600 min with backpressure recorded every 50 min. DP represents total change in
Syringe filter Sartorius Minisart SRP15 with polytetrafluoroethylene (PTFE) membrane, 0.22um pore size, 15mm diameter, not sterile, pack of 500 Sartorius Minisart SRP15 Filtration Consumables - Syringe Filter
Minisart filters have a Luer Lock inlet and outlet, for positive attachment to the syringe. The filter is 26 mm in diameter with a hold-up volume of 0.1 mL. Suitable for clear aqueous solutions not requiring preliminary filtration.
Buy EMD Millipore SLGVR04NL HPLC Certified Syringe Filter, Durapore PVDF, 0.22um, 4mm dia, 100/pk and more from our comprehensive selection of Millipore Syringe Filters Request A Quote ORDER/QUOTE STATUS Shop Products
