Acrodisc PTFE 0.2 micron filter for gasses

Acrodisc Syringe Filters with PTFE Membrane - 0.45 µm, Standard 25mm.Syringe filters with PTFE membrane are ideal for the filtration of organic solvents and harsh solvents in HPLC (0.45 μm) and UHPLC (0.2 μm) sample preparation. Sample filtration helps protect sensitive parts of analytical instrumentation from particulate build-up, extending

The new Acrodisc® One and Acrodisc® PSF premium syringe filters combine the benefits of a multi-layered prefiltration device with an automation-certified filter housing. Increased surface area for maximizing throughput Heat sealed membrane for reduced breakthrough Accurate analysis. HPLC certified for low levels of UV-absorbing extractables

PTFE is a hydrophobic membrane, so it will repel water and is not suitable for the filtration of aqueous solutions. As well as being suitable for the filtration of organic solvents in applications such as HPLC and UHPLC sample preparation, the hydrophobic nature of the PTFE membrane makes these syringe filters ideal to use in gas filtration or as a moisture barrier in venting applications.

Reliable Results with Superior Protection. Whether pursuing analytical goals in life science, pharmaceutical methods, research and development, quality control, or environmental applications, Pall’s sample prep Acrodisc® syringe filters offer reliable and reproducible results. Our HPLC, LCMS and IC certified Acrodisc syringe filters efficiently remove particulate contamination from samples, protecting instruments and preventing costly system maintenance and premature column replacement.

PTFE CR Acrodisc Syringe Filter, 25 mm, 0.2 µm, 50/pk. Waters recognizes that the desired output of each analysis is unique and influenced by the experiment and lab conditions, which is why we've developed such a broad and comprehensive product line to satisfy your every lab need. To ensure the continued best performance, Waters recommends using the PTFE CR Acrodisc Syringe Filter with the ACQUITY UPLC System.

Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments that would otherwise

The PTFE CR Acrodisc Syringe Filter's housing is made of a hydrophobic polytetrafluoroethylene membrane on a polypropylene support, making it an excellent piece of lab equipment for filtering gasses and/or organic liquids. Additionally, when filling sample vials with a 13 mm small spike outlet, it prevents an "air bubble" lock.

Acrodisc® Syringe Filters, 25 mm, Pall Laboratory Supplier: Pall Laboratory These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media. Wide range of filter media available Available in 0.2 µm for UHPLC applications Available with pre-filter for difficult to filter samples Color coded for easy identification

Description. Syringe Filters with High Flow Rates and Low Protein Binding 0.2 µm, 25 mm (50/pkg). Superior flow rates and higher throughputs than competitive devices., Pall Acrodisc Syringe Filters with Supor Membrane, Sterile Filtration, 25 mm (50/pkg) “Pall Laboratory products are designed for laboratory applications only.

The PSF syringe filter has larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2. This gives the PSF syringe filter a much improved throughput and flow rate. PTFE PSF syringe filters are available with a multi-layered glass fiber prefilter (GxF) above the PTFE membrane.

0.7. Notes: 1. Airflow values calculated assuming linear relationship between volumetric airflow and differential pressure. 2. Water flows measured after prewetting with alcohol and calculated assuming linear relationship between flow and differential pressure. 3. Bubble points for 0.2µm, 0.45µm, and 3.0µm pore sizes measured using IPA; all

4423 Acrodisc CR PTFE, 0.2 µm, 13 mm 100/300 4553 Acrodisc CR PTFE Minispike, 0.45 µm, 13 mm 100/300 4422 Acrodisc CR PTFE, 0.45 µm, 13 mm 100/300 4225 Acrodisc CR PTFE, 0.2 µm, 25 mm 50/200 4219 Acrodisc CR PTFE, 0.45 µm, 25 mm 50/200 4226 Acrodisc CR PTFE, 1 µm, 25 mm 50/200 4484 Nylon Acrodisc, 0.45 µm, 4 mm 250/750 4550 Nylon

The Nonsterile Acrodisc™ PTFE Filter is the ultimate in chemical compatibility for filtering harsh chemicals that destroy other membrane materials. Nonsterile PVDF Acrodisc™ features a polyvinylidene diflouride membrane which is chemical-resistant, hydrophobic, and solvent-compatible for HPLC sample preparation.

13 mm Acrodisc syringe filters are designed for the filtration of sample volumes up to 10 mL. They feature an effective filtration area of 1.0 cm 2 and a polypropylene housing which has excellent chemical compatibility properties. The syringe filters are HPLC certified for low levels of UV-absorbing extractables, preventing spurious peaks on chromatograms, ensuring both accurate and reliable results.

2021 new 0.2 um ptfe filter for gasses-Voa Vial Supplier Oct 21, 2021 · Oct 11, 2021 · Pall Acrodisc ptfe membrane filter 0.22 um online. solvent compatibility ptfe 0.2 micron fil